Raspberry Pi carputer update

The only update of the week is that I tested the composite output in a Toyota Highlander’s entertainment system. It booted fine. The fonts are not as crispy as I wanted, but still readable. I didn’t have a chance to test the XBMC however web browsing was acceptable with an open wifi around the campus. ๐Ÿ™‚

I’m also waiting some batteries for my old Voltmeter ๐Ÿ™‚ Once it’s working I can start some prototyping.

Hopefully more updates in a week.

20130119-231422.jpg

rarcrack with big files

If you are trying to crack a big rar file with rarcrack (Mine was 2.6G) and you’re receiving this error:

$ ./rarcrack --type rar ./file.rar
 RarCrack! 0.2 by David Zoltan Kedves (kedazo@gmail.com)

 ERROR: The specified file (./file.rar) is not exists or
 you don't have a right permissions!

You need to add these lines below in rarcrack.c and recompile. (Put them before #include rarcrack.h )

#define _FILE_OFFSET_BITS 64
#define __USE_LARGEFILE

While you’re there you can fix the error message’s English ๐Ÿ˜‰ I leave it to you to find it. ๐Ÿ˜‰

Raspberry Pi powered carputer.

I got myself a raspberry pi couple of weeks ago. First I tried to make a HTPC out of it using XBMC but the interface was too slow for my taste. So I decided to build a carputer. ๐Ÿ™‚ I have very basic electronic knowledge, so this will be a learning process for me too.

So far what I need is this list below:

  • a car (Check)
  • a 12V to 5V converter: I have cheap lighter to USB adapter. I’ll start with that but I’m thinking about this in the future.
  • a 5V power source activated when the car power is shut: For this one I’m going to start with a circuit I had in hand that I was using to charge my wifey’s phone using a small solar panel. It has a 2000mAh Li-Po battery on it. (That battery is most probably flat. I’ll need a new one)
    I will need this power source for only maybe 1 min. Read next bullet point.
  • a relay circuit that will detect that the car power is shut off and will send a GPIO signal to Rpi to shut itself off. Otherwise there will be corruption at some point of time. ๐Ÿ˜› I believe I should write a simple script to shutdown to tie it to that GPIO signal.
  • a 7″ touchscreen screen (possibly with an HDMI input. I have couple of candidates.)
  • a software to play music and video. Biggest candidate so far is XBMC.

Nice to have:These will require a USB hub since I only have 2 USB inputs. (I need to look at the power requirements for the USB hub)

  • a wifi/bluetooth solution for phone interaction.
  • a GPS interface.

More update weekly. (hopefully!)